Dvd-Cd Drive; Pressing Ejector Button - HP StorageWorks 12000 - Virtual Library System EVA Gateway User Manual
Hp storageworks 12000 gateway virtual library system user guide (ah814-96014, march 2010)
Hide thumbs
Also See for StorageWorks 12000 - Virtual Library System EVA Gateway:
- User manual (264 pages) ,
- Manual (218 pages) ,
- Design manual (160 pages)
Table of Contents
Advertisement
NOTE:
The replacement drive is automatically configured to RAID 1 — no administrator action is required.
DVD-CD Drive
CAUTION:
To prevent improper cooling and thermal damage, do not operate the node unless all bays are
populated with either a component or a blank.
1.
Power off the node.
NOTE:
The ejector button for the CD-ROM drive is recessed to prevent accidental ejection; it may
be helpful to use a small, flat, blunt object, such as a key or pen, to push the ejector button.
2.
Press the ejector button in firmly until the DVD-CD drive ejects (1).
Figure 59 Pressing ejector button
.
3.
Pull the DVD-CD drive out of the node (2).
To replace the component:
1.
Carefully align the connector on the rear of the drive with the connector on the DVD-CD drive
interface board.
204
Component Replacement
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageWorks 12000 - Virtual Library System EVA Gateway and is the answer not in the manual?