Deleting A Lan/Wan Replication Target; Changing The Lan/Wan Replication Target Password; Editing A Lan/Wan Replication Target's Availability Windows - HP StorageWorks 12000 - Virtual Library System EVA Gateway User Manual

1. Follow steps 1 through 3 above.
2. Select Edit Availability Windows from the task bar.
The Edit Availability Windows screen displays. See
Figure 22 Editing a LAN/WAN replication target's availability windows
.
3. To delete a availability window, select Delete in the row of that policy window in the Current
Availability Windows section of the screen.
4. To add a availability window, enter the information in the Add Availability Window section of
the screen, and then select Add.
Repeat this step for as many availability windows as you need.
NOTE:
When adding multiple availability windows, you must select Add for each new availability
window or the system will not record it.
5. Select Submit.

Deleting a LAN/WAN Replication Target

1. Select the Automigration/Replication tab.
2. Expand LAN/WAN Replication Targets on the navigation pane.
3. Select the LAN/WAN replication target you wish to delete.
4. On the LAN/WAN Replication Target Details screen, select Delete on the task bar.
5. Select OK from the dialog box.
The LAN/WAN Replication Targets screen displays with the deleted target removed from the list.

Changing the LAN/WAN Replication Target Password

You may need to change the LAN/WAN replication target's password in the event of a security
breach. The following steps will stop all communication between the source and the target, and then
re-establish secure communication.
Figure 22.
HP StorageWorks 85