Setting The Network Settings Using Command View Vls; Set Network Configuration Wizard Window - HP StorageWorks 12000 - Virtual Library System EVA Gateway User Manual
Hp storageworks 12000 gateway virtual library system user guide (ah814-96014, march 2010)
Hide thumbs
Also See for StorageWorks 12000 - Virtual Library System EVA Gateway:
- User manual (264 pages) ,
- Manual (218 pages) ,
- Design manual (160 pages)
Table of Contents
Advertisement
5.
Verify the network settings have been changed by entering:
showConfig
Setting the Network Settings using Command View VLS
To set the network settings using Command View VLS, set either the:
•
DHCP usage and host name, or
•
Fully qualified host name (or host name and DNS domain name separately), DNS server address,
IP address, gateway, and netmask
To set the network settings using Command View VLS:
1.
Open a Command View VLS session and log in as the administrator. See
"Opening a Command View VLS Session from a Web
2.
On the System tab, select Chassis in the navigation tree.
3.
Select Set Network Configuration under Maintenance Tasks.
4.
Current network configuration, NTP settings, and time zone settings are displayed. Modify these
as needed
Figure 28 Set Network Configuration Wizard window
.
(Figure
28).
Browser" on page 105.
HP StorageWorks
115
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageWorks 12000 - Virtual Library System EVA Gateway and is the answer not in the manual?
Questions and answers