Power On/Off; Set The Power To On; Set The Power To Off - Brother RH-981A Instruction Manual

Power ON/OFF

Set the power to ON

1. Set the power of the machine to ON.
2. Press the [P] key of the programmer.
The buzzer starts to sound, the program is automatically read from the machine, and the programmer
screen will be displayed. All the lamps of the machine except the power supply lamp turns OFF.
(NOTE) The [P] key becomes inoperable when the machine is in conditions described below:
• In auto/manual sewing
• In feeding for test
• In changing parameter values (while the display is blinking)

Set the power to OFF

(CAUTION) When you set the power to OFF, be sure to confirm data is not in communication nor
receiving. If set to OFF while in data communication and receiving, the data is likely
to be disrupted.
1. Press the [P] key of the programmer.
The buzzer starts to sound and the display on the screen disappears. This operation is operable on any
screen except for the time when data is in communication. The machine returns to the state before the
programmer is activated.
(CAUTION) The data of the programmer is retained for about 1 month after the power is supplied.
All the data may be lost in more than a month after the power is off and E-59 may
appear.
Press the [ENTER] key when this screen is displayed and the data returns to
defaults.
W0034Q
W0035Q
PD-9810
Chapter 2 PREPARATION
1403Q
E-11