File Saving Function
Three programs at maximum, which are currently read in the programmer, can be stored as a file.
Saved files are optional to read and write. The same file can be used on multiple machines if the
programmer is connected to different machines and the saved file is written in them.
For the method to save a program in a file, refer to "Program Writing to the File"(page E-31).
(NOTE)
The taper tack and the straight bar tack programs are saved in different files respectively.
While reading and writing the file, either one of files is selected according to specifications
of connected machines.
PD-9810
Chapter 6 HANDY FUNCTIONS
E-35