Display Of The Program Nos. For The Machine At Cycle Program Writing - Brother RH-981A Instruction Manual

Chapter 7 OTHER FUNCTIONS

Display of the program Nos. for the machine at cycle program writing

When the cycle program set on the programmer is written, an exceptional display may occur for the
program No. display of the machine depending how both settings are combined.
When numbers of the cycle program set on the programmer are less than those set on the
machine;
• C1 - C3 are set to the cycle program of the machine.
• [C3] is displayed on the program No. window of the machine.
• [C1] and [C2] are set to the cycle program of the programmer.
When writing is performed to the machine with these conditions above, the display in the program
No. indication box of the machine is changed as illustrated below:
<Display in the program No. indication box>
(NOTE) When numbers of the cycle program set to the machine are less than those set to the
programmer, display in the indication box will not change.
E-42
PD-9810