Table of Contents
Advertisement
This function enables you to search and confirm the con-
tents of the recorded program(s) using the index mark.
The VCR begins fast forwarding by selecting this func-
tion. When the VCR find the beginning of the pro-
gram(=the index mark), the VCR begins playback video
tape at high speed for 30 seconds. Then, return to fast
forwarding again to the beginning of next program. The
VCR repeats these operation to the tape end.
Concerning
the index mark, please
see "INDEX
SEARCH" section.
• Tape must be fully rewound.
• You can begin the Quick-Find
by pressing the
QUICK-FIND button on the remote control. You
can also begin the Quick-Find by the following pro-
cedure.
1
Select "SEARCH SELECT"
Press the MENU button until tbe
I
_*_ SEL_C, 1
SEARCH
SELECT menu ap-
_ _o,cK-_o
SEARCH
TI_E SFJ_RC_
pears.
2 Select "QUICK-FIND"
Confirm "QUICK-FIND"
is pointed to, then press the
EFWD/I_ button. The VCR begins the Quick-Find.
TO SKIP TO THE BEGINNING
OF
NEXT PROGRAM
Press the QUICK-FIND
button on the remote control.
TO VIEW AT NORMAL
SPEED
Press the PLAY button. The Quick-Find is cancelled.
• A video cassette must be insert in the VCR for this
function to work.
• This function will not operate in the recording mode.
• When you want to cancel the Quick-Find
while in
progress, press the STOP button.
• When the end of a tape is reached during the Quick-
Find, the tape will automatically rewind to the begin-
ning. After rewinding finishes, the VCR will eject the
tape and turn itself to off.
The Time Search function makes it possible to quickly
advance the tape to your desired position simply by en-
tering the exact amount of playback time you want to
skip.
Example:
To watch a program after 2 hours and 50
minutes from the present position, in either
direction.
• You can choose the time search mode by pressing
the TIME SEARCH button on the remote control.
Then continue with step [3].
1
Select "SEARCH SELECT"
Press the MENU button until the
{
_
SEARCH
SELECT menu ap-
l
_'_'_
IKO_X S_JmC_
rl_
SE_UI01
)ears,
2 Select "TIME SEARCH"
Press the PLAY/& or STOP/Y button to point to "TIME
SEARCH". Then, press the EFWD,_- button.
3 Enter your desired time
Press the PLAY/k or STOP/V
button until your desired time ap-
pears. ( "2:50" stands for 2 hours
50 minutes)
• The Time Search mode will be cancelled if the pro-
cedures are not activated in 30 seconds.
4 Begin Time Search
By pressing the REW or F.FWD button, the VCR will
rewind or fast forward to the specified point.
The time counts down as the searching progresses.
5 After Time Search
Playback starts automatically when 0:00 is reached.
• A video cassette must be inserted in the VCR for this
function to work.
• Time Search can be set up to a maximum of 9 hours
59 minutes (9:59).
• This function will not operate in the recording mode.
• When you want to cancel the Time Search while in
progress, press the STOP button.
- 23 -
EN
sF23
Advertisement
Table of Contents
