Table of Contents
Advertisement
This function enables you tosearch and confirm the
con- I The Time Search function makes it possible to quickly
tents of the recorded program(s)
asing the index mark. i advance the tape to your desired position simply by en-
The VCR begins fast lbrwarding
by selecting this func-
tering the exact amount of playback time you want to
tion. When the VCR find_e
b_inning
O_acthkevPdo- ! _k_P.
gram(=the index mark), the
CR b gins p ayb
i
o
ample:
To watch a program after 2 hours and 50
tape at high speed for 30 seconds. Then, return to fast
minutes from the present position, in either
forwarding again to the beginning of next program. The
VCR repeats these operation to the tape end.
Concerning
the index
mark,
please
see "INDEX
SEARCH" section.
• Tape must be fully rewound.
I
Select"QUICK-FlND"mode
Press the QUICK-FIND
button
[_ ....
1
on the remote control.
TO SKIP TO THE BEGINNING
OF
NEXT PROGRAM
Press the QUICK-FIND
button on the remote control.
TO VIEW AT NORMAL
SPEED
Press the PLAY button. The Quick-Find
is cancelled.
• A video cassette must be insert in the VCR for this
function to work.
• This function will not operate in the recording mode.
• When you want to cancel the Quick-Find
while in
progress, press the STOP button.
• When the end of a tape is reached during the Quick-
Find, the tape will automatically
rewind to the begin-
ning. After rewinding finishes, the VCR will eject the
tape and turn itself to off.
direction.
"1 Select "TIME SEA RCH" mode
Press the TIME SEARCH button on the remote control.
2
Enter your desired time
I_==._
!
Press the PLAY/A,
STOP/Y, or
TIME
SEARCH
button
until
your desired time appears.
("2:50"
stands for 2 hours 50
minutes)
• The Time Search mode will be cancelled if the pro-
cedures are not activated in 30 seconds.
3
Begin Time Search
By pressing the REW(IND) or EFWD button, the VCR
will rewind or fast forward to the specified point.
The time counts down as the searching progresses.
4 After Time Search
Playback starts automatically
when 0:00 is reached.
• A video cassette must be inserted in the VCR for this
function to work.
• Time Search can be set up to a maximum of 9 hours
59 minutes (9:59).
• This function will not operate in the recording mode.
• When you want to cancel the Time Search while in
progress, press the STOP button.
-21 -
EN
9J27
H58M0
Advertisement
Table of Contents
