Table of Contents
Advertisement
When
the VCR
receives
the signals
using
the
audio/video input jacks on the rear panel of the VCR
from your satellite tuner,the VCR will turn itself on, and
record. Then when there is no signals, the VCR stops
and turns itself off automatically. If your satellite tuner
has the EPG (Electronic Program Guide), you can timer
record using it. For details, please see your satellite
tuner's owner's manual. Also, you need to follow the
steps below for the VCR.
* Connect the audio/video input jacks on the rear
panel of the VCR to the audio/video output jacks on
the satellite tuner.
• Press the TAPE SPEED button on the VCR to select
the desired tape speed (SP/LP/SLP).
Note for viewing or recording a program using your sat-
ellite tuner connected to the VCR:
• If a broadcasting program has the copy guard protec-
tion, you may not record clearly.
• When you view a program, noise may appear on the
TV screen by the copy guard protection of this VCR.
In this case, connect the satellite tuner to the TV di-
rectly.
• When you record a program using the Auto Satellite
Link feature, the beginning(a few seconds) of a pro-
gram may be not recorded.
• If your satellite tuner has the synchronized timer fea-
ture by the broadcasting time of a program, please
see your satellite tuner's owner's manual.
1 Setthe program to berecorded onthesatellite
tuner.
Please see your satellite tuner's owner's manual.
2
Select "VCR SET UP"
Press the MENU button until the
VCR SET UP menu appears.
i
3
Select "SATELLITE LINK"
Confirm "SATELLITE LINK" is
pointed to.
Then, press the EFWD/I_ button
so that [ON] will appear next to
"SATELLITE LINK" on the TV
SCreen.
RENT_.
AUTO Rtl_JR_
AU_
OVr
After 1seconds, the VCR turns off and the "[]" indicator
on the VCR will come on.
• To exit a stand-by mode of the Auto Satellite Link,
press the POWER button to turn on the VCR. In this
case, the VCR turns the Auto Satellite Link setting to
OFF automatically.
• When stopping a recording of the Auto Satellite Link
while in progress, press the STOP/EJECT button on
the VCR. In this case, the VCR turns the Auto Sat-
ellite Lmk setting to OFF automatically.
• There is a chance that a recording will not be per-
formed correctly when another timer recording over-
laps. If the preset time for an Auto Satellite Link
comes up during a timer recording, the timer record-
ing has priority.
- 34 -
EN
8F23
Advertisement
Table of Contents
