Table of Contents
Advertisement
SUPPLIED
ACCESSORIES
Coaxial
Cable
Remote
Control
Unit
Batteries
,.
(AA
x 2)
PART NO.
(WPZ01 ff2LG006/5750398/
@
WPZ0t 02BB001 )
PART NO. (N9311UD)
• _fy_uneedt_rep_acetheseaccess_ries_p_easerefert_thePARTN_.undertheinustrati_nsandcal_
1-800-968-3429.
• Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators (Splitter).
Contact your local electronics store for these items.
• We do not recommend the use of universal remote controls. Not all of the functions may be controlled
with a universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given
may not operate this unit. In this case, please call the manufacturer
of the universal remote control.
VIDEO CASSETTE TAPE INFORMATION
This VCR will operate with any cassette that has the VHS mark. For best results, we recommend
the use of high-quality
tapes. Do not use poor quality or damaged tapes.
PRECAUTIONS
• Avoid moisture. Moisture condensation may occur
on the tape if it is moved from a cold place to a warm
place or visa versa. Before using a tape with these
conditions, to avoid damage of the tape and your
VCR, walt until the tape has warmed to room tem-
perature and the moisture has evaporated.
• Avoid extreme heat, high humidity and magnetic fields.
• Do not tamper with the cassette mechanism.
• Do not touch the tape with your fingers.
THREE DIFFERENT
TAPE SPEEDS
Before recording, select the tape speed from : SP mode
(Standard Play), LP mode (Long Play) or SLP mode
(Super Long Play).
The table below shows the maximum recording/play-
back time using Tr0, T120 or T160 tapes in each mode.
CORRECT
WRONG
Recording/Playback
Time
T60
TI20
T160
1 hour
2 hours
2-2/3 hours
2 hours
4 hours
5-1/3 hours
3 hours
6 hours
8 hours
Tape Speed
IT_ofta_
SP mode
LP mode
SLP mode
REMOVING
A CASSETTE
1) In the Stop mode, press the EJECT button on the re-
mote control or press the STOP/EJECT button on the
VCR. The cassette will be ejected.
2) Pull the cassette out of the cassette compartment.
3) Store the cassette in its case as shown.
ERASE
PREVENTION
You o..prevent
aooidantal
erasingof a recordiog b yI
breaking off the tab on the I
_
_
/I
back edge of the cassette.
• Tab
INSERTING
A CASSETTE
Insert the cassette in the direction as shown. Push in
gently, but continuously, on the center-back of the cas-
sette until it is drawn into the VCR.
The VCR will automatically turn on.
If you decide to record on I
the tape again, cover the
hole w th plast c tape.
- 7 -
EN
8F23
Advertisement
Table of Contents
