Index Search - Sylvania 2870LV Owner's Manual

This feature provides a method of indexing the starting
point so that it can be easily returned to in either fast
forward or rewind mode.
• The index mark will be made automatically when the
REC button is pressed. It will also be marked at the
starting point of Timer recording, OTR, and record-
ing by Auto Satellite Link.
• The index mark will not be recorded if the
PAUSE/STILL button is pressed and released during
recording.
• The time gap between making the index marks on the
tape should be greater than 1 minute for SP recording,
2 minutes for LP recording and 3 minutes for SLP
recording.
Example: You are watching program number 4 and
want to fast forward to program number 7.
You must skip three progrums.
CURRENTPLAYBACK PROGRAM
H
Beginning of tape _' End of tape
r4 3 2 1 1 2
INDEX MARK
• You can choose the index search mode by pressing
the INDEX SEARCH button on the remote con-
trol. Then continue with step [3].
1
Select "SEARCH SELECT"
Press the MENU button until the r _'_
SEARCH SELECT menu ap- L
_.=.-.,o
pears.
2
Select "INDEX SEARCH"
Press the PLAY/& or STOP/Y button to point to "IN-
DEX SEARCH". Then, press the EFWDII_ button.
3
Enter your desired number
button until the number of pro-
grams that you want to skip ap-
)ears.
(Example: "03" for 3 programs)
• The Index Search mode will be cancelled if the pro-
cedures are not activated in 30 seconds.
4
Begin Index Search
Press the REW or EFWD button. The VCR begins re-
winding or fast forwarding to the beginning of desired
program.
NOTE: Every time an index signal is skipped, the num-
ber in the program indicator decreases by one.
5 After Index Search
When the preset program is reached, the VCR will start
playback automatically.
• A video cassette must be inserted in the VCR for this
function to work.
• The number of Index Searches can be set up to 20.
• This function will not operate in the recording mode.
• When you want to cancel the Index Search while in
progress, press the STOP button.
- 22 - EN