Table of Contents
Advertisement
In the Pause/Still mode only, when the picture begins to
vibrate vertically, stabilize the picture by pressing the
CHANNEL •or • button.
NOTES:
• If the picture is distorted or rolling vertically, adjust
vertical hold control on your TV.
• Most newer TV's do not have a user adjustable ver-
tical hold control.
• Tracking adjustment will be set automatically (Digi-
tal Tracking function) when you start playback.
However when playing pre-recorded tapes or tapes
recorded on units other than your own, noise lines
(black and white streaks) may appear on the playback
picture. If this occurs, you can adjust the tracking
control manually by pressing the CHANNEL • or •
button on the VCR until the streaks disappear.
To return to the DTR function, stop the tape once and
start playback again.
• You can reduce the noise lines by pressing the
CHANNEL • or • button in slow mode, too. Slow
tracking adjustment will not be set automatically.
NOTE:
In Still mode, press the SLOW button and
press the CHANNEL • or • button until the
streaks disappear. To return to Still mode,
press the PAUSE/STILL button again.
Press the SLOW button to reduce the playback speed.
The VCR mutes the sound during slow motion. You can
control the speed by pressing the EFWD button (faster)
or the REW button (slower).
Press the PLAY button to return to normal playback.
NOTE:
If it is left in the Slow mode for more than five
minutes, the VCR will automatically go into
the Stop mode.
Use this feature to memorize the beginning point that
you want to return to. And you can search it easily by
rewinding or fast forwarding.
• Use the remote control for this procedure.
• The "PWR." and the "VCR" indicator must appear
on the VCR's digital display.
• Turn on the TV and set the TV to channel
3 or 4. Now set the CH3/CH4 switch on
the back of the VCR to match the channel
[Sackor
selected on the TV.
theVCRI
• This feature only works with a prerecorded tape.
1
Stop tape at your desired point
Insert a prerecorded tape. Rewind or fast forward the
tape to the beginning point at which you want to mark.
2 Reset the counter to 0:00:00
Press the COUNTER RESETbutton
on the remote con-
trol. If necessary press the COUNTER RESET button
again to reset the counter to 0:00:00.
3SeecttheCo
I 1
Memory mode
Press the COUNTER MEMORY
button on the remote control until
"M" appears on the TV screen.
_®
• The COUNTER MEMORY button does not function
if the Auto Repeat mode is set to [ON]. In this case,
set the Auto Repeat mode to [OFF].
4
Begin recording or playback
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.
5 To activate the Counter Memory
Press the REW (or F.FWD) button, the VCR will stop
automatically when the counter has returned to approxi-
mately 0:00:00.
NOTE:
The displayed time will not change during
blank portions on the tape.
TO EXIT
THE COUNTER
MEMORY
Press the COUNTER MEMORY button on the remote
control so that "M" disappears from the TV screen.
On more information concerning the on screen display,
please refer to page 36.
- 20 -
EN
8F23
Advertisement
Table of Contents
