Table of Contents
Advertisement
PLAYBACK
• The "PWR." and the "VCR" indicator must appear
on the VCR's digital display.
• Turn on the TV and set the TV to channel
3 or 4. Now set the CH3/CH4 switch on [e_"_cml
the back of the VCR to match the channel
selected on the TV.
IBaek o f
the VGR]
m
1
Insert a prerecorded tape
Counter mode appears at 0:00:00 on the TV screen. If
the erase-protection tab has been removed, the VCR will
start playback automatically.
Press the PLAY button.
NOTE:
If any menu is activated on the TV screen, the
PLAY button on the remote control does not
function. Press the RESET/EXIT
button to
clear the menu. Then, press the PLAY button.
lf a tape is already in the VCR with power off
2A)
Using button on the VCR
Just press the PLAY button on the VCR. Power will
automatically turn on and playback will start. (Direct
Button Operation)
2B)
Using button on the remote control
Press the POWER button to turn on the VCR, and
then press the PLAY button on the remote control,
ii
lllllllllllll
i
3
To stop playback
Press the STOP button.
This feature is very useful in finding or skipping over a
particular scene on a tape. In this mode, the sound will
be muted.
l) You may view a video tape at a high speed in either
a forward orreverse direction by pressing the F.FWD
or REW button. (in the SP / LP / SLP modes)
2) Press it again and the VCR will now search in super
high speed. (in the LP / SLP modes only)
3) Press the PLAY button to return to normal speed.
You can view a still picture on the TV screen during
playback (the Still mode). Press the PAUSE/STILL but-
ton during playback. Press the PLAY button to return to
playback.
• You can advance the picture by one frame at a time
by pressing the PAUSE!STILL button during the still
mode.
• It"it is left in the Still mode for more than five min-
utes, the VCR will automatically switch to the Stop
mode.
You can view the playback picture at a high speed or
advance one frame in the forward or backward direction
ufmg the Jog and Shuttle function.
1) Press the JOG&SHUTILE
button on the remote con-
trol
in the Play
mode
or Still
mode.
The
JOG&SHUTTLE
button lights on and the picture
will freeze on the screen.
NOTES:
• The Jog Dial and the Shuttle Ring are available only
during the JOG&SHUTTLE
button lights on. No ac-
tion for Jog&Shuttle function in 30 seconds makes
the JOG&SHUTTLE button go off.
• When noise lines appear on tl_ still picture, change
to slow mode and adjust tracking as described in
Slow Tracking.
2) To make the playback speed faster, hold and turn the
Shuttle Ring in either direction, The further the ring
is rotated, the faster the playback speed in the forward
or reverse direction. If you release the ring, the ring
will return to the original position and the picture will
be in the Still mode,
3) To advance the frame one by one, turn the Jog Dial
(the inner dial) in either direction. The faster the dial
is rotated, the faster the frames advance one by one
in the forward or reverse direction.
4) To return to normal playback, press the PLAY but-
ton.
--ShutdeRi_g
__ Jog Di_
_
--
_
--
JOG&SHUTTLE
button
<Reverse direction>
<Forward direction>
- 19-
EN
8F23
Advertisement
Table of Contents
