Table of Contents
Advertisement
OPERATING
CONTROLS
AND FUNCTIONS
NOTES:
• Some controls are located on both the VCR and on the remote control, some are only located on one, some
controls operate certain functions only in one location. See each description for details.
• We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a
universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given may
not operate this unit. In this case, please call the manufacturer of the universal remote control.
--VCR FRONT PANEL---
2 3 45 6
33
--REMOTE
CONTROL--
1, Cassette Compartment
7 8
9
10
11 12
13 14 15
4
button-- Press to cancel a setting of timer pro-
gram. Press to correct digits when setting program
(For example: setting clock or timer program). Press
to add or deletz channel numbers during channel pre-
set. (only on the remote control)
4.
PLAY button- Press to begin playback.
• button- Press to enter digits when setting pro-
gram (For example: setting clock or timer program).
Press to select the setting modes from the on screen
menu. (only on the remote control)
S,
F.FWD button- Press to rapidly advance the tape, or
view the picture rapidly in forward during playback.
(Forward Search)
I,- button- When set'ringprogram (For example: s4t-
ring clock or timer program), press to determine your
selection and proceed to the next step you want to input.
Press to determine the setting modes from the on screen
menu. Press to add or delete channel numbers during
channel preset. (only on the remote control)
6. PAUSE/STILL button- Press to temporarily
stop
the tape during recording or to view a still picture
during playback.
Frame Advance function-Press to advance the
picture by one frame at a time during still mode.
'7. POWER button-
Press
to turn VCR
on and off.
Press to activate timer recording.
8. VCPdTY button--
Press to select TV or VCR mode.
2. EJECT button-
PresstoteraovethetapefromtheVCR.
STOP button-
Press to stop the tape motion.
• button-- Press
to enter digits
when setting
pro-
gram (For example:
setting clock or timer program).
Press to select the setting modes from the on screen
menu. (only on the remote control)
VCR position: to view playback, to monitor video
recordings or watch TV using the VCR tuner.
TVposition:
to watch TV or to view one program
while recording another.
9. Remote sensor window-
Receives
the infrared
signals from the remote control.
3. REW button- Press to rewind the tape, or to view 10. Digital display- See page 36.
the picture rapidly in reverse during the playback
mode. (Rewind Search)
- 8 -
EN
Advertisement
Table of Contents
