Sylvania 2870LV Owner's Manual page 11

I Fi9"3: VHF/UHF Separate Antenna
[UHF antenna]
(notsupplied)
[BackoftheVCR]
[Sackofthe
UHF/VHFcombination T V]
[VHF antenna]
]not s upp_ied/
TOVCR'sANT.IN
Jack)
OR
(supplied) [Backofthe
UHFNHF separated TV]
To VCR'sANT.OUT
(Bottom Jack)
(supplied)
You can record one channel while viewing another. The same goes for Automatic Timer Recording and One Touch
Recording. For details, please refer to "Recording" on page 24.
I Fig.4: Cable Box and Satellite Box I
]Backof the
UHF/VHFcombination T V]
]CableBOX or SatelliteBox] [sack oftheVCR]
(notsupplied) To VCR'sANT.IN
IN Jack OUT Jack (TopJack)
AN'r UHFNt'_F
ToVCR'sANT,OUT
(BOttom Jack)
OR
(supplied) [Backof the
UHF/VHFseparated"W]
UHFNHF separator
(notsupplied) /HF Q
JHF
(SUpplied)
You can ONLY record and view the SAME channel when using this connection. There are no exceptions. The
same goes for Automatic Timer Recording and One Touch Recording.
Note: Channel memory programming is NOT needed when using this connection.
RECORDING HINT
1) VCR power and the "VCR" indicator must be on.
2) Turn on the TV and Box.
3) Set the channel to be recorded on the Box.
4) Set the "IV and VCR to channel 3 or 4,
5) Set the CH3/CH4 switch on the back of the VCR to match the channel set on the TV and VCR.
6) Press the RECORD button, or for AUTOMATIC TIMER RECORDING the VCR must stay on channel 3 or 4 at
step [9] on page 27.
Continued on the next page.
- 11- EN
8F23