Table of Contents
Advertisement
Some customers with cable boxes may record one channel and view another, with either one of the connections below.
Satellite systems: Neither one of these connection will work. For satellite owner wishing to record one channel
and view another, please contact the manufacture of the satellite system.
coaxial cable (not suppttE
[ Back of the Cable Box ]
coaxial cable (not supp_L_.
]
[ Back °f the VCR I L: _
coaxial cable (not supplie_
On olderWS a matching
transformermay be
(
needed here. (not supplied)--_,u_(
I Fig.5:
I I Fi9"6:
From the Cable Company
,_[
2way signal splitter ]
_
(not supplied)
oaxial cable (not supplied)
_[
A / B switch ] (not suPPlied)
coaxial cable (supplied)
_
[ Back of the TV ]
You can record a scrambled channel while viewing an-
other.
RECORDING
HINT
1) VCR power and the "VCR" indicator must be on.
2) Turn on the TV and Box.
3) Set the channel to be recorded on the Box.
4) Set the TV and VCR to channel 3 or 4.
5) Set the CH3/CH4 switch on the back of the VCR to
match the channel set on the TV and VCR.
6) Press the RECORD button, or for AUTOMATIC
TIMER RECORDING the VCR must stay on channel
3 or 4 at step [9] on page 27.
7) Set the A-B switch to the other side, or for AUTO-
MATIC TIMER RECORDING set the A-B switch
to the other side after step [12] on page 27.
8) Select the channel to be viewed on the TV.
Note: If you wish to see the VCR menu, view what you
are recording or playing a tape with this connec-
tion, make sure the A-B switch is on the correct
side.
I
From the Cabie Company
coaxia_C_ble (not supplk
On older TVs a matching transforrr
may be needed here.
(not s uppled)
This connection is good on]
are scrambled. You can recoz
[ Back of the VCR I
[ Back of the Cable Box ]
:oaxialcable (supplied)
[_kof_W]
if none of your channels
one channel while view-
ing another.
Scrambled channels cannot be recorded
with this connection.
RECORDING
HINT
1) VCR power and the "VCR" indicator must be on.
2) "rum on the TV and Box.
3) Set the channel to be recorded on the VCR.
4) Set the TV and Box to channel 3 or 4.
5) Set the CH3/CH4 switch on the back of the VCR to
match the channel set on the TV.
6) To view ONE channel while recording ANOTHER
the "VCR" indicator must be off.
7) Or for AUTOMATIC TIMER RECORDING
the
"VCR" indicator must be off after step [11] on page
27.
8) Set the channel to be viewed on the Box.
Note: If you wish to see the VCR menu, view what you
are recording or playing a tape with this connec-
tion, the "VCR" indicator must be on and the Box
channel must match the channel selected on the
back of the VCR. (CH 3 or 4)
Note to CATV system installer
This reminder is provided to call the CATV system
installer's at_ntion to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
- 12-
EN
8F23
Advertisement
Table of Contents
