Index Search - Sylvania SRV206 Owner's Manual

CURRENT PLAYBACK PROGRAM
Beginning of tape _' End of tape
IPro., I,,o.fl ,,o.fl IP,o.S IP*o.01P*o., I
r=.4 3 2 1 1 2 3
INDEX MARK
7" Select "INDEX SEARCH" mode
This feature provides a method of indexing a recording ! Press the INDEX SEARCH button on the remote con-
starting point so that it can be easily returned to in either I trol.
fast forward or rewind mode. _ .............................................................
2Theindexmarkwillbemadeaut°maticallywhentbe'2Entery°urdesirednumber lPressthe PLAY/.,,, ,.,. STOP/.,or k,-t*_
RECORD button is pressed. It will also be marked at (_..__"_"
the starting point of Timer recording, OTR, and re- INDEX SEARCH button until [ r_
cording by Auto Satellite Link. I the number of programs that you [
The index mark will not be recorded it" the I wantto skip appears. |
PAUSE/STILL button is pressed and releasedduring i (Example: 03 for 3 programs)
recording. 'F
• The time gap between making the index marks on the ! • The Index Search mode will be cancelled if the pro-
* cedures are not activated in 30 seconds,
tape should be greater than 1 minute for SP recording i ..................................................................
and 3 minutes for SLP recording. I
..... i 3 Begin
Index Search
Example: :tou are watcmng program numoer 4 and
, _ Press the REW(IND) or E FWD button The VCR begins
want to fast torward to program number 7. ; " " , .
rewinding or fast forwarding to the beginning of desired
You must skip three programs. ! program.
NOTE: Every time an index signal is skipped, the num-
ber in the program indicator decreases by one.
L
4 After Index Search
When the preset program is reached, the VCR will start
playback automatically.
• A video cassette must be inserted in the VCR for this
function to work.
• The number of Index Searches can be set up to 20.
• This function will not operate in the recording mode.
• When you want to cancel the Index Search while in
progress, press the STOP button.
- 22 -
EN
9J27
H59M5