Table of Contents
Advertisement
❏
If you stack printouts, place a sheet of plain paper
or other absorbent paper between the individual
prints.
When storing unused paper
Return any unused paper to the original package, and
store it away from extreme temperatures, high
humidity, and bright lights.
When displaying printouts
❏
When displaying your printouts indoors, Epson
recommends placing your printouts in glass
frames to preserve the colors in your image.
❏
Avoid displaying your printouts outdoors or in a
place exposed to direct sunlight to prevent fading.
Note:
For best results, allow your prints to dry thoroughly for
24 hours before framing.
18
Preparing to Print
PictureMate PM 270
Choosing a Photo Source
If two or more sources such as a memory card and
external device are available, you need to set the
source of the photos by following this procedure
before you start printing photos.
1.
Press x Menu.
2.
Select Select, then press OK.
3.
Select Select Source then press OK.
4.
Select Memory Card or External Device and
then press OK.
Advertisement
Table of Contents
