Testing And Connecting The Printer - Epson Aculaser C2000 Setup Manual

6

Testing and Connecting the Printer

Plugging in the Printer
1. Make sure that you have the correct power cord for your
power source.
c
2. Attach the power cord as shown below.
See the required
voltage here
c
3. Plug the power cord into a properly grounded electrical
outlet.
Caution:
It is not possible to change the printer's voltage. If the
required voltage and your outlet voltage do not match,
contact your dealer for assistance. Do not plug in the power
cord.
Caution:
Avoid using an electrical outlet that is controlled by wall
switches or automatic timers. Accidental disruption of power
can erase valuable information in your computer's and
printer's memory.
OFF
Testing and Connecting the Printer
AC inlet
36