Light Metering Mode; Automatic Focus Modes; Manual Focus Adjustment - Canon DC22 Instruction Manual

Adjusting the Picture: Exposure, Focus and Color ........- - - - - - - - - - - -
Light Metering Mode
You can select the light metering mode.
(OJ 13)
Options
Depending on the shooting conditions, one
or more AF frames out of the nine frames
available are automatically selected and
the focus is fixed on them.
Four framing corners will appear on the
screen when making the selection; they do
not appear while actually recording.
The focus is automatically fixed to the
center AF frame. This is convenient for
making sure the focus is exactly where you
want it.
A single focusing frame appears in the
center of the screen when making the
selection; the frame will appear also while
actually recording.
* Except for the
[II
FIREWORKS] recording
program.
~~~
Select ( ......
~
) the autofocus mode.
(OJ 13)
• Default value
Meters the area within the spot AE point
frame. Use this setting to adjust the
exposure to match the subject in the center
of the screen.
POINTS TO CHECK
Appropriate for standard shooting
conditions, including backlit scenes. The
camcorder divides the picture into several
areas and the light is measured in all of
them to achieve the optimal exposure for
the subject.
Mode switch:
P
Options
I
FUNC.]
¢:II
Desired option
Icon of the currently selected
I
FUNC.j
¢
Light Metering Mode
.(J,
FUNC.
([Il27)
FUNC.
Manual Focus Adjustment
Autofocus may not work well on the
following subjects. In such case, focus
manually.
Automatic Focus Modes
You can change the AF (autofocus) frame
selection mode.
Reflective surfaces
Subjects with low contrast or
without vertical lines