Least Cost Routing Access - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
Enter the Last Number
Redial access code.
To Access Least Cost Routing:
1. Enter the Least Cost Routing
(LCR) access code.
2. Dial the destination number.
4-38
Display telephones will display the redialed number.
You will hear ringback tone if the destination is idle.
If the destination is busy or does not answer, your operational
alternatives are the same as when a call is dialed manually (Camp-on,
Message Waiting, etc.).
NOTES:
1. A stored Last Number Redial number can consist of up to 24 digits.
Stored digits do not include feature access codes or Speed Calling
numbers. Any digits that are dialed after pressing the LND key, such
as account codes or voice mail codes, will not be stored for later
redialing purposes.
2. A call that is placed via Last Number Redial will be placed over the
line determined by your telephone's line preference type. To place
the call over a different line, you must preselect the desired line. A
private line must always be preselected.
3. If a private line is used to place a call via Last Number Redial, any
trunk access code that is part of the dialing sequence will be ignored.
4. A stored Last Number Redial number will remain stored until another
number is successfully dialed from the telephone. Any newly-dialed
number will replace the last. To save a specific number for later
access, see Save and Repeat or Autodial.
5. Last Number Redial can be activated during any call state that allows
initial call dialing.

LEAST COST ROUTING ACCESS

You can access the system's Least Cost Routing feature to route
outgoing calls over the least-costly call facilities. If these trunks are not
available, a warning tone may sound to indicate that higher-priced
facilities are about to be searched.
Dial tone will sound to indicate that LCR has been accessed.
Up to ten digits can be dialed for long distance calls. Up to seven digits
can be dialed for local calls. Your system may also require the entry of
toll prefixes for long distance or international calls.
FEATURE OPERATION