Call Forward - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
To Activate Automatic Answer:
1. Press the Automatic Answer
(AUTO) access key.
To Cancel Automatic Answer:
1. Press the AUTO key.
4-8
The AUTO LED will light solid red and will remain lit until Automatic
Answer is canceled.
Any incoming calls to your telephone's idle prime or intercom line, or any
internal/external calls to your telephone's ACD agent line, will cause a
burst of tone ring and will automatically activate the telephone's speaker
and microphone. You can continue the conversation by using the speaker
and microphone or by picking up the telephone handset.
The AUTO LED will go out.
NOTES:
1. Automatic Answer can be activated while a telephone is in either an
idle, ringing, or talk state. If the feature is activated while a call is in
process, Automatic Answer will apply to the next incoming internal or
intercom call that rings on your idle line.
2. Automatic Answer can be canceled while a telephone is in either an
idle or talk state. If the feature is canceled while a call is in progress,
the next internal call to the station will ring as a normal call.
3. Automatic Answer works only when a call is placed to an idle line.

CALL FORWARD

You can forward incoming calls that are directed to your station's prime
line, to another internal location (another station, an attendant, a
message center, etc.) or to an off-premises location. Calls can be
forwarded based on either an all calls, no answer, or busy/no answer
condition. The Call Forward feature is activated through the use of a
designated Call Forward—All Calls (CFAC), Call Forward—No Answer
(CFNA), or Call Forward—Busy/No Answer (CFBN) access key, or
through the use of feature access codes. Any of these Call Forward
feature types can be assigned to a Preregistered Call Forward access
key, which is used to forward calls to a specific destination. This allows
you to conveniently forward calls to a set location, without the need to
dial a destination number.
FEATURE OPERATION