Ringing Patterns - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000 GENERAL INFORMATION
OVERRIDE ACCESS TONE
Following Override Warning Tone, the subject of an Attendant Override
will hear a continuous low volume tone while the call is being overridden.
QUIET TONE
A silent tone which is heard by parties placed on hold when a system
does not utilize the Music-on-Hold feature. Quiet tone also occurs during
the operation of some features.
RECALL DIAL TONE
Three short pulses followed by continuous tone. This tone indicates that
additional digit entry is required to complete the current feature.
REORDER TONE
A repeating .25 second on, .25 second off tone which indicates that your
call has been denied due to a dialing error or service restrictions.
RINGBACK TONE
A repeating 1 second on, 3 seconds off tone which indicates that your
call is ringing.
SUCCESS TONE
A siren tone which indicates that feature activation has been accepted by
the system.

RINGING PATTERNS

Each ringing pattern that is supported by the PERCEPTION 4000
system is described below. A visual depiction of each ringing pattern is
provided at the end of this user guide.
INTERNAL CALL RINGING
Indicated by a ringing signal generated through the telephone speaker
every 4 seconds.
EXTERNAL OR ATTENDANT CALL RINGING
Indicated by a double ringing signal generated through the telephone
speaker every 4 seconds.
1-4