Other Printer Malfunction Symptom Table; Symptom - Lexmark Optra W810 Service Manual

4023-001

Other Printer Malfunction Symptom Table

Symptom

No Printer Power
Transport Drive Malfunction
Fuser Failure (Abnormal
Temperature)
Fuser Failure (Warm-up
Temperature Low)
Horizontal Registration Failure
Operator Panel Does Not Operate
No Paper Pickup from Tray 1
No Paper Pickup from Tray 2 or 3
Toner-Feed Feed Problems
Action
"No Power Service Check
Go to
(923)" on page 2-34
"Paper Feed Fuser/Exit
Go to
Service Check" on page 2-46
"Fuser (Abnormal
Go to
Temperature) Service Check
(923)" on page 2-34
"Fuser (Temperature Low)
Go to
Service Check (920/922)" on
page 2-35
.
"Paper Feed Synchronizing
Go to
Roll/Registration Service Check"
on page 2-45
.
"LCD Hardware Test" on
Run
page 3-5 "Button Test" on
and
page 3-6
. If the display has
diamonds on it or is blank and the
printer PORs correctly, replace the
operator panel. If problem persists,
replace the printer main engine
board PWB-A. If the machine beeps
5 times and the screen remains
blank or displays diamonds, replace
the operator panel.
"Paper Feed Pickup Tray 1
Go to
(250-Sheet) Service Check" on
page 2-44
.
"Paper Feed Pickup Tray
Go to
2&3 (500-Sheet) Service Check"
on page 2-44
.
"Toner Feed Service
Go to
Check" on page 2-35
Diagnostic Information
.
.
.
.
2-31