4023-001
Paper Take-Up From Lift 2
After all sheets of paper have been taken up and fed from lift 1, lift 1
moves to the top level position to serve as part of the paper path for
feeding paper from lift 2.
After the trailing edge of the last sheet of paper from Lift 1 unblocks
paper empty sensor 1 PPS1, both paper take-up roll 1 and 2 turn.
Paper take-up roll 1 and 2 transports the sheet of paper until the
paper blocks LCC take-up sensor PPS0.
Paper take-up roll 1 transports the paper located at PPS0 until the
paper blocks paper standby position sensor S1. This is the standby
position of the paper.
1-50
Service Manual