Adjustments; Printer (Main) - Lexmark Optra W810 Service Manual

4023-001

Adjustments

Printer (Main)

Image Registration Adjustment
If the starting position of the image (registration gap (d)=4mm) in the
sub-scanning direction is not suitable, adjust the gap by following
this procedure:
Visual Adjustment
1. Turn the printer off.
2. Press Select and Return as you turn the machine on.
3. Select REGISTRATION from the Configuration Menu Group.
4. Scroll to the margin you want and press Select. See the
following table.
5. Scroll to the value you want and press Select. A Quick Test
page prints.
6. Repeat margin adjustment until the registration gap (d) is the
appropriate distance.
Margin
Top Margin
Tray 1 Left Mar
Tray 2 Left Mar
Tray 3 Left Mar
Tray 4 Left Mar
Tray 5 Left Mar
Note: Tray 2 through 5 menu settings appear only if the corresponding
tray is installed.
4-4
Service Manual
Valid Range
=-50 to 50 (0)
=-50 to 50 (0)
=-50 to 50 (0)
=-50 to 50 (0)
=-50 to 50 (0)
=-50 to 50 (0)