Lexmark Optra W810 Service Manual page 119

4023-001
Message
Replace Toner To
Continue
Replace PC Kit To
Continue
Staples Empty
Staples Low
Tray 1 Missing
Tray 2 Missing
Tray 3 Missing
Tray 4 Missing
Tray 5 Missing
Description
The toner cartridge is
almost empty.
The PC kit is almost
empty.
The printer finishing
device is out of staples,
or the staple unit is not
installed.
The printer finishing
device is low on staples.
An input tray is missing
from the printer.
Action
Inform customer that they
need to replace the toner
cartridge. See operator
manual. If you cannot
"Toner Feed
reset, go to
Service Check" on
page 2-35
.
Inform customer that they
need to replace the PC kit.
See operator manual.
Install new staples. Check
the connection between
the stapler unit and the
finisher stapler connector.
Replace the staple unit if
necessary.
Install new staples. Check
the connection between
the stapler unit and the
finisher stapler connector.
Replace the staple unit if
necessary.
Check the tray (cassette
set sensor and actuators)
and connectors.
• Tray 1–PC6
• Tray 2–PC3
• Tray 3–PC3
• Tray 4–SLIDE
Replace as necessary.
Replace the printer main
engine board (PWB-A) if
necessary.
Diagnostic Information
2-11