Output Bin Tests - Lexmark Optra W810 Service Manual

4023-001

Output Bin Tests

Output Bin Feed Test
The Feed Test operation within the output bin tests menu verifies
that media can be fed to a specific output bin.
Note: No information is printed on the test pages since the laser
isn't engaged during the test.
1. Enter the Diagnostic mode. See
page 3-1.
2. Select [OUTPUT BIN TESTS].
3. Select [Feed Test].
4. Select output bin:[Standard Bin], [Output Bin 1]...[Output Bin
10].
5. Select [Single] or [Continuous].
– The following message displays and the power indicator
blinks:
<output bin>
Feeding...
where <output bin> represents the output bin selected for
the feed test.
6. Press Return or Stop to stop continuous print.
– The following message displays:
<input tray>
Cancelling...
7. Press Return to go back to Diagnostics mode main menu.
"Diagnostics Mode" on
Diagnostic Aids
3-13