Installing The Drive - Epson 3865X Plus User Manual

Installing the Drive

Follow these steps to install the hard disk drive in the vertical
mounting position:
1. Locate the hard disk drive ribbon cable that came in the
box with your computer. It is a flat cable with three
connectors on it (one on each end and one in the middle).
Use the connector in the middle of the cable.
As shown below, there are two rows of holes in the end of
the connector. One of the holes is blocked with a plug.
The ribbon cable socket on the back of the drive has two
rows of pins. In one of the rows, a pin is missing.
n mmmmmmmmmmmmm1mmm1m
n mmmmmmmm~mmmmmmmmmm
ribbon cable connector
I II
I
blocked hole
ribbon cable socket
missing pin
Installing and Removing Disk Drives
B-13