Epson 3865X Plus User Manual page 162

1. Use the instructions in your GEM documentation to install
GEM, version 2.2, with the standard VGA screen driver.
Insert the GEM 2.2 System Master Disk in drive A and log
onto drive A. Type the following and press
GEMPREP
Follow the instructions displayed on the screen to complete
the GEM installation.
2. Follow the steps below to create a GEM driver pack disk.
First, remove the Master disk from drive A and insert a
blank diskette.
3. Format the diskette using the MS-DOS FORMAT
command or the Epson MENU Utility. (See your MS-DOS
Reference Manual for instructions.) FORMAT prompts
you for a volume label by displaying the following:
Volume label (11 characters, Enter
for none?)
Type the following in uppercase letters and press
GEM DRIVRPK
-
Remove the blank, formatted diskette.
4. Insert the Utility 1 diskette and log onto drive A. Type the
following and press
COPY \GEM2\SCRNSTAL.EXE B:
The screen displays the message below:
Insert diskette for drive B: and
press any key when ready
Enter:
Using the VGA Utilities
Enter:
Enter:
A-17