Installing A Hard Disk In The Vertical Position; Removing The Mounting Frames From The Drive - Epson 3865X Plus User Manual

Installing a Hard Disk in the Vertical Position

Follow the instructions in this section to install (or reinstall) a
hard disk drive in the vertical mounting position. You may need
to perform the following procedures:
connecting it to the drive
If you are installing a new drive in the vertical mounting
position, you should follow all of the steps in this section. If you
are reinstalling a drive that you previously removed from this
position, see "Installing the Drive," on page B-13.

Removing the Mounting Frames From the Drive

Your hard disk drive comes with 5 '/+inch mounting frames
attached to each side of the hard disk drive, as shown below.
Installing and Removing Disk Drives
B-8