Epson 3865X Plus User Manual page 160

You can install the driver automatically each time you turn on
or reset your
AUTOEXEC.BAT file. To modify the AUTOEXEC.BAT file
to load the 800
steps:
1. Type
of your hard disk.
2. Type the following and press
COPY AUTOEXEC.BAT+CON AUTOEXEC.BAT
3.
Type R4V1600 and press
4. Press F6 and then
Configuring AutoCAD
The first time you use AutoCAD with the driver, you need to
configure AutoCAD for an ADI display.
1. Select Configure AutoCAD from the AutoCAD
main menu.
2. After you see the current configuration (if any), select
C o n f i g u r e v i d e o d i s p l a y .
3. Select ADI display v4.0 as your new driver. (The
menu indicates that this is installed at interrupt 7A hex.)
4. Save the new configuration and return to the main menu.
computer by placing the command in your
600, 16-color graphics driver, follow these
x
C : \
and press
Enter.
Enter
to log onto the root directory
Enter:
Enter.
Using the VGA Utilities
A-15