Epson 3865X Plus User Manual page 169

3. Create a temporary directory called VENTEMP on your
hard disk. At the MS-DOS prompt, type the following and
Enter:
press
MD VENTEMP
4. To copy all the files from the VEN1 directory on your
Utility 1 diskette into the VENTEMP directory on your
hard disk, type the following and press
COPY A:\VEN1\*.* C:\VENTEMP\*.*
5. Remove the Utility 1 diskette.
6. Use the Epson MENU utility or the MS-DOS FORMAT
command to format a blank diskette. (See your MS-DOS
Reference Manual for instructions.)
7. Insert the blank, formatted diskette and log onto the
VENTEMP directory. Then type the following and press
Enter:
COPY *.* A:
8. Log onto drive A.
9. If you are using Ventura Publisher, version 1.0, type the
following and press
VPDRIVER
If you are using Ventura Publisher, version 1.1, type the
following and press
VPDRVl 1
10. Select either VGA (640 x 480) or VGA (800
continue the installation procedure according to the
instructions on the screen.
A-24 Using the VGA Utilities
Enter:
Enter:
-
Enter:
600) and
x