Continuing From An Error Message - Epson 3865X Plus User Manual

Continuing From an Error Message

If your computer has never been set up, you may see an error
message, such as the following:
1 6 2 - S y s t e m o p t i o n s n o t s e t
(Resume = "F1" key)
If you see an error message like this one, follow these steps:
1. Press F1. The computer beeps and the screen displays a
message, such as the following:
The error message beside the diamond indicates the
condition causing the error. There may be more than one
error listed in the message. Here are some of the error
messages you may see:
Time is invalid
HDD and/or HDC failed initialization
Memory size is incorrect, correction made
Checksum is incorrect
Real-time clock has lost power
HDD is incorrect
Some
you to set a default value, so the screen does not display the
Set default
errors, press
so you can enter a new setting.
2-4 Running the Setup Program
(Run SETUP in REFERENCE DISK)
Incorrect configuration
errors, such as Time is invalid, do not allow
the screen displays the main Setup menu
E ;
SC
value prompt. If you see one of these