Wordstar, Version 3.3 - Epson 3865X Plus User Manual

WordStar, Version 3.3

Your computer's built-m VGA adapter can run WordStar,
version 3.3, in 132-column text mode without a special driver.
However, once you have installed WordStar on your hard disk,
you need to install a patch (modification) to the WordStar
program file.
Installing the Patch
To install the patch to the WordStar program, follow the steps
below:
1. Log onto your WordStar directory.
2. Type the following and press
of the original WordStar program file:
COPY WS.COM WSORIG.COM
3. Insert the Utility 1 diskette in drive A.
4. To copy the file WS33INST.EXE from the UTILS directory
on the Utility 1 diskette to your WordStar directory, type
the following and press
COPY A:\UTILS\WS33INST.EXE
5. Type the following and press
WS33INST.EXE program:
WS33INST
This program makes the necessary patch to the WS.COM
program file.
Enter
to make a backup copy
Enter:
Enter
to start the
Using the VGA Utilities
A-31