Slide the diskette into the drive until it is in all the way.
Then turn the latch down to lock it in a vertical position.
(For more instructions on inserting and removing diskettes,
including 3 ½-inch diskettes, see Chapter 3.)
3. Turn on your system. (Remember to turn on your monitor
and any peripherals before you turn on the computer.) The
screen displays the Operation Menu:
OPERATION MENU
1 - S e t u p
2 - Format hard disk
3 -
4 - Prepare hard disk for moving
0 - Exit to DOS for more utilities
If an error message appears when you turn on the computer,
see "Continuing From an Error Message," below.
4.
The
Setup option
Enter.
The screen displays the main Setup menu:
Processor speed
Keyboard/ Sound
Real-time clock
Hard disk drive
Diskette
Serial/Parallel
System
diagnostics
is highlighted. To select it, press
Exit
Display
Password
drive
Running the Setup Program
2-3