Connecting A Printer Or Other Device; Using The Parallel Interface - Epson 3865X Plus User Manual

Once you have installed your video card, return to this section
to connect your monitor to the computer. If your monitor came
with its own manual, follow the instructions there. Otherwise,
you can follow the steps in "Using the VGA Interface" above;
just insert your monitor plug into the video card port instead of
the built-in VGA port.

Connecting a Printer or Other Device

Your computer has both parallel and serial interfaces. To
connect a printer or other peripheral device to one of these
interfaces, follow the instructions below. Of course, Epson offers
a full range of printers; ask your dealer for more information.

Using the Parallel Interface

The parallel interface on your computer is Centronic®
compatible and uses a DB-25S connector.
To connect your printer and computer, you need an IBM
compatible printer cable. If you are not sure which one you
need, check with your Epson dealer.
1-8 Setting Up Your System