Selecting an Option
When you are using the System diagnostics program, you
need to select an option from a menu. There are two ways to do
this:
highlighted cursor block to the option you want and then
press
Enter to
For example, you may see this menu:
1 - Run test one time
2 - Run test multiple times
- Exit
0
Suppose the first option is highlighted. If you want to select that
option, just press
you want to select option 2, you can either press
the cursor block to move to that option. Then press
causes
Enter to select it.
Therefore, when you select an option, you can either use T, J,
the option. Then press Enter.
the operation.)
Note
You can press E
currently displayed and return to the previous one.
E-4
Performing System Diagnostics
Enter to
select it.
select it.
Enter
any time you want to leave the menu
SC
(because it is already highlighted). If
(Y
must press
OU
often
or 2; this
Enter to start