Removing An Option Card - Epson 3865X Plus User Manual

7. Secure the end of the card to the back of the computer with
the retaining screw and washer.
8. Follow the instructions at the end of this chapter to replace
the cover. Then, if you have installed a memory card, see
"Post-installation Setup for Memory Cards," following that
section. If you have installed any other type of option card,
see "Post-installation Setup" after you replace the cover.

Removing an Option Card

If you need to remove an option card, follow these steps:
1. First, remove the cover from the computer. See "Removing
the Cover," on page 5-2, for instructions.
2. Remove the screw securing the card to the back of the
computer and pull the card straight up and out of the slot.
Either set the card aside by placing it gently on a soft surface
with the component side facing up or carefully wrap the
card, preferably with the original packing materials, and
place it inside its box for safe storage.
Installing and Removing Options
5-16