Star Trac E-TRx Work Instructions page 43

Hide thumbs Also See for E-TRx:

Step 21.

Plug identified PVS connectors into the high-

lighted locations on the center console board.

Note: The DC power connectors on the center con-

sole board are interchangeable.

Step 23.

Install the lower display back cover onto display

using (6) M4 screws. Next install upper display

back cover with (8) M4 screws, tighten all

screws.

Caution: Do not use power tools or over torque the

screws.

YOU HAVE NOW COMPLETED THE PERSONAL VIEWING SCREEN INSTALLATION

Step 22.

Secure the PVS center console in place using

the screws you saved earlier.

Step 24.

Turn power on. Perform a visual inspection, and

test the features and functions of the unit prior to

use.

Note: Refer to the User's Manual for calibration in-

structions and other settings.

620-7920 Rev A

Table of Contents

E-trxe