Star Trac E-TRx Work Instructions page 39

Hide thumbs Also See for E-TRx:

From PVS

From Neck

Step 5.

Connect the coax cable coming the treadmill

neck to the coax cable coming from the PVS

neck, secure tightly.

Now take the 5" silicon wrap from the kit and

peel off its protective tape then wrap the two

connectors so that all of the metal surface is

covered.

Screws to be removed

Step 7.

Remove the screws to release the standard

console and remove wires or harnesses at-

tached to the display. Save screws for later

use.

Silicon Wrap

Step 6.

Plug-in the coax cable coming from your cable

service provider onto the coax connector lo-

cated at the base of the treadmill's frame.

Step 8.

Remove the standard center console from the

display.

Note: You will no longer need the center console,

and if desired, you can store it away for any possi-

ble future use.

620-7920 Rev A

Table of Contents

E-trxe