Star Trac E-TRx Work Instructions page 38

Hide thumbs Also See for E-TRx:

PERSONAL VIEWING SCREEN (PVS) INSTALLATION INSTRUCTIONS

Step 1.

Remove all contents from the packaging and

verify that you have the following parts:

1. 1 PVS assembly with mounting

2. 1 PVS center console assembly.

3. 1 hardware kit

4. 1 Owner's Manual

Note: If the center console is being installed on a

new unit, then perform this installation prior to mount-

ing the display assembly onto the frame.

M8 screw with M8

nut on the other side

Step 3.

Mount the PVS bracket on the treadmill. Using

the 5mm hex key, screw in the (2) M8 Button-

head screws at the base of the PVS first (do not

tighten yet). Install (1) M8 Button-head screw

into the hole on the PVS neck, then install (1)

M8 hex nut on the back side (do not tighten).

M8 screw

Step 2.

Verify following items included in hardware kit:

(1) Silicon wrap

2. (2) Tie strap

3. (1) M8 nut

4. (1) 5MM Hex (Allen) key.

5. (1) Headphone jack label.

6. (5) Screw M4x.7, 19mm, Pan Head

7. (4) M8 x 20mm Button head screws.

8. (1) Alcohol wipe.

9. (1) E-TRx Hot Bar headphone jack assembly.

10. (1) E-TR headphone jack assembly.

Step 4.

Tighten the hex nut on the back of the neck.

620-7920 Rev A

Table of Contents

E-trxe