Star Trac E-TRx Work Instructions page 14

Step 5.
Connect the E-Stop cable (g) to J25 connector
on the display board, then connect the rail stop
cable (f) to J5 connector on the display board.
.
Step 7.
Connect the fan power cable (b) to J20 connec-
tor on the display board.
15
Step 6.
Connect the Hot Bar cable (i) to J15 connector
on the display board.
Step 8.
Connect the contact heart rate cable (c) to heart
rate board connector on the display board.
620-7920 Rev A