Star Trac E-TRx Work Instructions page 16

Hide thumbs Also See for E-TRx:

Step 13.

Install the top back cover piece (p/n 020-7074)

onto the upper display back cover (p/n 020-

7069

Step 15.

If not performed previously, position the tread-

mill where you plan to use it. If necessary, level

the treadmill using the two adjustable feet under

the tail roller. Loosen the lock nuts, rotate the

feet until the treadmill is stabilized, and re-

tighten the lock nuts.

YOU HAVE NOW COMPLETED THE E-TRx TREADMILL INSTALLATION

Step 14.

Install the lower display back cover onto dis-

play using (6) M4 screws. Next install upper

display back cover onto display with (8) of the

same screws, tighten all screws.

Caution: Do not use power tools or over torque the

screws.

Step 16.

Turn the power switch on. Perform a visual in-

spection, and test the features and functions of

the unit prior to use.

Note: Refer to the User's Manual for calibration in-

structions and other settings.

620-7920 Rev A

Table of Contents

E-trxe