Star Trac E-TRx Work Instructions page 23

Hide thumbs Also See for E-TRx:

Step 20.

Install the lower display back cover onto display

using (6) M4 screws. Next install upper display

back cover onto display with (8) of the same

screws, tighten all screws.

Caution: Do not use power tools or over torque the

screws.

Step 22.

Turn power on. Perform a visual inspection, and

test the features and functions of the unit prior to

use.

Note: Refer to the User's Manual for calibration in-

structions and other settings.

YOU HAVE NOW COMPLETED THE EMBEDDED DISPLAY INSTALLATION

Step 21.

If not done already, position the treadmill where

you plan to use it. If necessary, level the tread-

mill using the two adjustable feet under the tail

roller. Loosen the lock nuts, rotate the feet until

the treadmill is stabilized, and retighten the lock

nuts.

620-7920 Rev A

Table of Contents

E-trxe