Star Trac E-TRx Work Instructions page 40

Step 9.
Install the new PVS center console in place.
Don't secure console with screws yet.
Step 11.
Remove the headphone jack blank cover.
Note: You will no longer need the cover, and if de-
sired, it can be stored away for any possible future
use.
41
Step 10.
Using a Phillips head screw driver, remove the
screw that holds in the headphone jack cap at
the lower front of the hot bar.
screw.
E-TR Headphone
jack assembly
a
Step 12.
Identify the two headphone board mounts that
came with the kit:
a. E-TR headphone jack assembly.
b.
E-TRx Hot Bar headphone jack assembly.
Retain the
Hot Bar Headphone
jack assembly
b
620-7920 Rev A