Star Trac E-TRx Work Instructions page 33

Hide thumbs Also See for E-TRx:

Step 5.

Using a Phillips head screw driver, remove the

screw that holds in the headphone jack cap at

the lower front of the hot bar.

screw.

E-TR Headphone

jack mount

Step 7.

Identify the two headphone board mounts that

came with the kit:

a. E-TR headphone jack mount.

b. E-TRx Hot Bar headphone jack assembly.

Note: You will not need the E-TR headphone jack, if

desired, you can store it for any possible future use.

Retain the

Hot Bar Headphone

jack assembly

Step 6.

Remove the headphone jack blank cover.

Note: You will no longer need the cover, and if de-

sired, you can store it away for any possible future

use.

Step 8.

Select the E-TRx headphone mount from the kit

and attach it to the available cut-out at the lower

front of the hot bar, then secure with previously

retained screw.

620-7920 Rev A

Table of Contents

E-trxe