Star Trac E-TRx Work Instructions page 13

LED DISPLAY CONSOLE INSTALLATION INSTRUCTIONS
Step 1.
Remove electronic display console from pack-
aging materials.
Note: If you are installing an iPod® Kit, a MYE Entertain-
ment kit or a Personal Viewing Screen kit along with this
display, it is recommended that you install the kit's center
console before you mount the display onto the frame.
Step 3.
Position the display assembly near the top rail
while a helper makes the necessary connec-
tions.
14
Step 2.
If the back display covers are attached to display
console then remove and save them for later
use, otherwise proceed to the next step.
d
b
c
a
Step 4.
Identify the cables coming from neck and rails:
a. DC power cable
b. Fan power cable
c.
Contact heart rate cable
d. Headphone jack cable i. hot Bar keypad cable
e. Main I/O cable
Note 1: If the unit is not equipped with a PVS or iPod® kit,
then the PVS power cable and coax cable should be
tucked down the neck.
Note 2: The User-Detect cable is only available on the E-
TRxe model.
g
j
f
e
i
f. Rail stop cable
g. E-Stop cable
h. Coax cable
j. User-Detect
(E-TRxe only)
620-7920 Rev A
h