Epson EM07ZS1647F User Manual page 68

2. Installation
(7) Select the protocol: Ethernet you will be using.
(8) Complete the installation.
(9) The message to ensure the restart appears. Click the Yes button.
(10) Start the C:\Install\FieldBus\Install\SP\Setup.EXE and install the service pack.
(11) After completing the installation of the service pack, shutdown the computer.
(12) Proceed to 2.9.4 Board Installation.
56
If you also use DeviceNet, select DeviceNet as well. If you also use PROFIBUS DP,
select Profibus-DP as well.
Select which type of device data files to install (GSD for PROFIBUS DP, EDS for
DeviceNet).
No installation is necessary when a service pack is not attached to controller.
Fieldbus I/O Rev.6