Epson EM07ZS1647F User Manual page 149

4.2.3.6.2 Verifying the PROFIBUS DP network condition
Fieldbus I/O Rev.6
The applicomIO Console application has the following functions:
Network Monitor function: Monitoring error condition detected on the
Diagnostic function:
(1) Select the Network Detection tab in the left center of the applicomIO Console
application.
(2) Click the Online Action button. The Network Monitor dialog appears.
You can check the conditions of the following errors on this dialog.
Token Error
Frame Error
When an error occurs on the network, it is added to the corresponding error
counter.
4. Troubleshooting (PROFIBUS DP)
network
Network diagnosis
Address Error Timeout Error
Network Cycle Bus Fault
137